App Core Stats
Tools and Testing > Statistics
|
App Stats |
|
|
retry table: Retry Count Avg Time |
Number of retries for a packet. |
|
commands received |
Commands received by the apps core |
|
commands responded |
Commands responded by the apps core |
|
commands repeated |
Number of commands that were repeated |
|
commands failed |
Number of times the device failed to send a command |
|
commands response failed |
Number of time the device failed to respond to a received command |
|
commands pending |
Number of commands pending to be processed |
|
commands late |
Number of times there is a late response for a command which will already have been timed out |
|
last host ID |
|
|
total_fh_page_irq |
Number of times the from host pager interrupt was fired |
|
total_fh_pages |
Number of time the device successfully got the data from host after the fromhost interrupt was triggered |
|
total_th_page_irq |
Number of times the to host pager interrupt was fired |
|
total_th_pages |
Number of time the device successfully sent the data to host after the to host interrupt was triggered |
|
Aon clk long calibration |
Number of times the Aon clock was calibrated |
|
Aon clk frequency |
Value of the Aon clock frequency in Hz |
|
Aon sleep duration adjusted for clock tolerance |
Increments if the aon-clk cant handle the sleep-duration |
|
number of PS_sleep |
Number of times the chip when to sleep |
|
woke from PS (timer) |
Number of times the chip woke up due to the timer set by the dynamic ps timeout value |
|
woke from PS (pin) |
Number of times the chip woke up by the host wake up pin |
|
Pager from_host reaped |
Number of times the from host page has been pushed back to the pager |
|
Pager to_host reaped |
Number of times the to host page has been pushed back to the pager |
|
to_host pages dropped (host in standby) |
|
| Invalid pages received | Total invalid pages received |
| Events to host sent | Number of events sent to the host |
| Events to host failed | Number of events the failed to be sent to the host |
| ARP requests detected | Information of the ARP packets. This will only be populated if the driver is loaded using enable_arp_offload modparam |
| ARP requests answered | |
| ARP requests dropped | |
| ARP requests let through | |
| No page for ARP response | |
| ARP table updated | |
| ARP gratuitous generated | |
| tx_status none to send | Increments when there is no tx status cached |
| tx_status couldnt get page | Increments when there is no cached page for tx status information |
| tx_status dropped | Increments if the tx status was dropped and not sent to host |
| tx_status buffer flushed | Number of times the tx status buffer was flushed as there were no pending tx status |
| tx_status transmission corrupted | Increments if the driver has inadvertently popped the same page twice for use in TX and has likely corrupted the original/new transmission |
| Wake action frames handled | |
| pageset stats: | |
| Pageset 0 | Pages sent from the host to the chip |
| allocated | Number of from host pages used |
| total | Total number of from host pages used |
| Pageset 1 | Pages sent to the host from the chip |
| allocated | Number of to host pages used |
| total | Total number of to host pages used |
| Apps main task unused stack (words) | |
| Apps timer task unused stack (words) | |
| RTOS heap free bytes | |
| IPv4 Packets received | Number of ipv4 packets received |
| TCP Packets received | Number of TCP packets received |
| UDP Packets received | Number of UDP packets received |
| DHCP Packets received | DHCP information. This will only be updated if the driver is loaded with enable_dhcpc_offload modparam |
| DHCP discoveries sent | |
| DHCP requests sent | |
| DHCP lease updates sent | |
| DHCP leases fully expired | |
| DHCP leases obtained | |
| DHCP leases renewed/rebound | |
| Standby wakeup frame rx | The standby mode requirements will be facilitated by powering off the host when not sending or receiving traffic. The host will be powered on by toggling a GPIO address.This can be enabled by morsectrl standby command |
| Standby status frame (standby) tx | |
| Standby status frame (awake) tx | |
| To mcu wake pin toggle | |
| Standby SA Query request tx | |
| RX corrupt dot11 action frames | Number of corrupted rx action frames |
| BSS keep alive tx | Number of keep alive frames transmitted |
| TWT failed to flush tx status before umac pause | Number of times the device failed to flush TX status buffer before sending TWT UMAC traffic update |
| System uptime (us) | |